E-Plex E-Logic E-Plex Software
E-Logic is a software program used to design, configure, and test E-Plex systems. E-Logic V1.11.0 – Not For New Designs E-Logic software version 1.11.0, includes some bug fixes and improves compatibility with the newest versions of Windows including Windows 10. This version is backward compatible with previous versions and provides full support for legacy modules […]
E-Plex 356DRIM Dual Relay Input Module
The E-Plex 356DRIM is a flexible input and output module consisting of 2 normally open relay outputs and 4 digital inputs. Each digital input is configurable as either active high or active low through the E-Logic software.For output relays, status LEDs are red when the relay is closed. For digital inputs, status LEDs indicate green […]
E-Plex 331BMI Inductive Battery Monitor
The E-Plex 331BMI battery monitor is an inductive monitor that senses both current and voltage. The battery monitor is bi-polar in that the E-Plex network reveals if the battery is charging or discharging. Put the positive battery cable through the centre of E-Plex battery monitor sensor, the sensor can be either secured to the cable […]
E-Plex 149CT30 Relay Module
The E-Plex 149CT30 Relay Module is an embedded, programmable relay output module that includes logic gates and timers on the E-Plex bus system. The 149CT30 relay module is well suited for switching heavy loads in automotive, marine and industrial applications. Two 149CT30 relays can be used as a pair for reversing DC motors. Key Features […]
E-Plex 439DMAC AC Power Distribution
The E-Plex 439DMAC has been designed to simplify electronic systems wiring by providing more control over AC loads. The module provides AC distribution and control for 110 and 220 single and split phase applications. Hydraulic magnetic circuit breakers provide traditional circuit protection. The 439DMAC supports a combination of single and double pole breakers. Manual override […]
E-Plex 389DMAC AC Power Distribution
The E-Plex 389DMAC has been designed to simplify electronic systems wiring by providing more control and monitoring of AC loads. The module can be used in single-phase 110 or 220 applications. It allows the designer to take advantage of advanced energy management capabilities such as intelligent load shedding to prevent unnecessary resetting of circuit breakers. […]
E-Plex 336PFM Power Frequency Module
The E-Plex 336PFM can be used to measure AC current up to 100 amps and voltage up to 250V AC and frequency of the AC supply. Furthermore, there is no need to use an external isolation transformer. The AC power monitor is capable of scaling the output values using E-Plex table builder. Table builder allows […]
E-Plex 387EBM E-Plex Bridging Module
The E-Plex 387EBM Bridge Module is capable of bridging between two independent E-Plex systems, and provides a galvanically isolated link between them, allowing 128 bits of information to be transferred in each direction. Key Features Dual EP3 Connections 128bit bi-directional interface Galvanic isolation Simple installation Easy to set-up within E-Logic Electrical Specifications Eplex LEN: nominal […]
E-Plex 803RDP Radial Distribution Point
E-Plex have introduced a new ‘plug and play’ bus connection system which is being designated as EP3. All E-Plex modules will be available as an EP3 variant at the same cost as the modules that you have traditionally used. New modules will only be available as EP3. The connection system simplifies installation and fault finding […]
E-Plex EP3 Bus Cable System
E-Plex have introduced a new ‘plug and play’ bus connection system which is being designated as EP3. All E-Plex modules will be available as an EP3 variant at the same cost as the modules that you have traditionally used. New modules will only be available as EP3. The connection system simplifies installation and fault finding […]
E-Plex 319RSM Resistive Sensor Monitor
The E-Plex 319RSM is used to measure resistances for standard gauges used in tank level monitoring. The module allows analogue gauges to be connected in parallel with the module so that localised monitoring can be provided as well. The E-Plex resistive sense module can read the analogue value of a sensor and display it at […]
E-Plex 318PFTG Pressure Tank Gauge
The E-Plex 318PFTG can be used in a wide variety of applications. The same tank sender can be used for diesel fuel, fresh water, grey water, or black water tanks. The tank gauge in its standard version can measure fluid up to a maximum depth of 2m and measures pressure of fluid in a tank […]
E-Plex 303TM Temperature Sensing
The E-Plex 303TM Temperature Module is capable of sensing temperatures from -20 to +70 degrees Celsius and can output that data to the E-Plex bus. Once the data is on the E-Plex bus, it can be relayed to a graphical or analogue display. The 303TM is weatherproof, which allows it to be used in a […]
E-Plex 218VBM Victron Battery Monitor
The E-Plex 218VBM provides a digital interface linking E-Plex to the precision BMV-60xS and BMV-70x ranges of battery monitors from Victron Energy. BMV-600 / 700 Key Features High resolution: 10 mA (0.01 A) with 500 A shunt Low current consumption: 1 mA Highly accurate battery monitoring State of charge tracking Predicts the time until the […]
E-Plex 218VEI Victron Energy Interface
The E-Plex 218VEI provides control and monitoring capabilities for Victron Energy’s VE.Bus range of products, it provides an E-Plex to VE.Bus conversion. The VEI works with all VE.Bus devices with software version 19xx111 and higher. This includes the following products: Phoenix Multi, Phoenix Multi Plus, Phoenix Multi Compact, Phoenix Inverter, Phoenix Inverter Compact & Quattro […]
E-Plex 816CAN Generic CAN Interface
The E-Plex 816CAN is an E-Plex/CAN gateway that allows bidirectional communications between E-Plex and a wide variety of CAN networks. These may be for example CANopen, J1939, or other proprietary CAN systems. The CAN bus is galvanically isolated to ensure reliable communications between systems running from different power sources. Using E-Logic, the system designer has […]
E-Plex 805OPM Octal Power Module
The E-Plex 805OPM is an eight channel DC power distribution module capable of handling loads of up to 15 A per channel or 50 A total. The eight channels can be utilised as either inputs, outputs, or a combination of both. Output channels may be paired in order to handle larger amperage loads. The 805OPM […]
E-Plex 425DRM E Dual Reversing Module (Emulated)
The E-Plex 826QRM with 425DRM emulation will functionally operate the same as the native 425DRM. This includes recognising and running the same logic as the native device, however the size and format are different and an adapter cable is required so the original Delphi connector that is fitted can be used. Alternatively the Delphi connector […]
E-Plex 821BD Dual Blocking Diode
When an E-Plex power module such as an 805OPM is used to power a load and that load may also be powered from another power source, a potentially damaging back feed situation is possible. The 821BD can be used to prevent the back feed from causing any damage, whilst still allowing the E-Plex module to […]
E-Plex 828BPM Plug & Play Bilge Control
The E-Plex 828BPM is a bilge pump control unit that operate locally to provide automatic ‘hard wired’ control of a bilge pump from up to two float switches. It also includes monitoring and control capabilities supported by E-Plex over it’s two wire bus. It can work with pumps up to 20 amps continuous load and […]
E-Plex 827OIM Octal Input Monitor
The E-Plex 827OIM is an active low digital input module. It provides eight channels of digital I/O in a single unit to detect inputs from equipment that switches to local ground (0V). The module has LEDs which will provide local verification of the status of the inputs. Key Features Eight active low digital inputs Local […]
E-Plex 421QIM E Quad Input Monitor (Emulated)
The E-Plex 827OIM with 421QIM emulation will functionally operate the same as the native 421QIM. This include recognising and running the same logic as the native device, however the size and format are different. Key Features Four active low digital inputs Local LED status indication Standard E-Plex Small Enclosure Standard EP3 connection
E-Plex 815ENO EnOcean Gateway Module
The E-Plex 815ENO allows EnOcean energy harvesting switches to be used to control an E-Plex system. EnOcean energy harvesting switches are wireless, battery free switches that generate all of the power they require from the motion of the switches as they are pressed. This significantly simplifies switch mounting and wiring. The switches are available in […]
E-Plex 428RSP LED Rocker Switch Panel
The E-Plex 428RSP is a programmable, multi-color LED, rocker switch panel designed to operate within an E-Plex system. This innovative new product incorporates independently controlled LED’s, allowing custom-configured color selection on a per LED basis. Via E-Plex software, each LED is capable of being configured to produce up to 64 unique colors without the need […]
E-Plex 416TPS Touch Panel Switch Module
The E-Plex 416TPS has a resistive touch panel, with LED’s for status indication. The touch panel display also includes an audible alarm for switch input verification or alert conditions. Customisable artwork is available for button identification. The display’s electroluminescent (EL) backlight allows the entire touch screen to be illuminated uniformly, making them easy to view […]
E-Plex 367TPD Touch Panel Display Module
The E-Plex 367TPD has a resistive touch panel, with LED’s for status indication and a 4-digit, 7-segment numerical LED display allowing valuable information to be viewed. The touch panel display also includes an audible alarm for switch input verification or alert conditions. Customisable artwork is available for button identification. The display’s electroluminescent (EL) backlight allows […]
E-Plex 900HMI 10-inch Touchscreen Module
The E-Plex 900HMI is a new touchscreen module that provides a smart and modern user interface to an E-Plex system. It allows for the monitoring and control of different subsystems all from one location. In addition to the display and control features, the 900HMI module can be used to activate and reprogram modules, and perform […]
E-Plex 801iPlex iOS Interface
The E-Plex 801iPlex provides connectivity between an E-Plex system and iOS devices (Apple iPhone, iPod Touch and iPad) via Wi-Fi. It allows bi-directional control and monitoring of an E-Plex system, to deliver a polished user interface through a familiar device. Graphical designs are created through CommandFusion; a powerful, free to download software package that blends […]
E-Plex 450ECM Electronic Control Module
256KB Memory The E-Plex 450ECM combines a master programmer and controller functionality with a customisable touchscreen in one low-cost interface. The control module is housed in a small enclosure that extends 50mm from behind the dash or wall surface. It is capable of monitoring and controlling tanks, pumps, lighting, HVAC, generator sets, engines and electronic […]
E-Plex 400ECM Electronic Control Module
128KB Memory The E-Plex 400ECM combines a master programmer and controller functionality with a customisable touchscreen in one low-cost interface. The control module is housed in a small enclosure that extends 50mm from behind the dash or wall surface. It is capable of monitoring and controlling tanks, pumps, lighting, HVAC, generator sets, engines and electronic […]